Disposable Y-Type 18G I.V Cannula CE certification

Disposable IV cannulas must be packaged and shipped in a manner that meets applicable regulatory requirements, including those of the local country. The packaging must be adequate to protect the product from any form of damage during transport and storage.

The packaging must be labeled and clearly marked to indicate the contents, the manufacturer's name, and the expiration date. The expiration date must be printed on the product label in accordance with the local regulations.

The product must be shipped in a temperature-controlled environment. The temperature must be maintained between -20°C and +25°C. The product must not be exposed to direct sunlight or any other form of radiation.

The product must be shipped according to the manufacturer's instructions and in accordance with the applicable regulatory requirements.

Instructions for use:

1. medical personnel should check the package strictly according to aseptic operation, and remove the product if it is well sealed and not broken;

2. tighten the heparin cap (if any), remove the protective cap and connect directly to the outer luer connector to drain the gas;

3. medical personnel rotate and loosen the needle tip protection sleeve, pinch the catheter holder with one hand, turn the needle handle slightly from side to side with the other hand, and then reset it to prevent needle adhesion;

4. hold the needle holder flap so that the syringe blade is facing upward at an angle of 15-30 degrees, puncture the vein straight and feed the needle slowly;

5. carefully observe the return of blood at the lateral hole of the needle core, depress the angle after seeing the return of blood, continue to enter the needle for 2 mm, hold the catheter holder in the left hand and withdraw the steel core about 5 mm with the right hand;

6. Hold the needle holder and feed the steel needle core and catheter together all into the vessel, and withdraw the steel needle core. Do not re-insert the steel needle into the catheter to avoid damage to the catheter. Put the withdrawn steel needle into the special apparatus;

7. Adjust the infusion flow rate by applying a transparent dressing;

8. After the indwelling infusion is finished, the tube should be sealed.

FAQ:

Q: What is a Disposable IV Cannula?

A: A Disposable IV Cannula is a medical device used for the introduction of a cannula into a vein in order to administer fluids or medications.

Q: What are the benefits of using Disposable IV Cannula?

A: Disposable IV Cannula offers enhanced patient comfort and safety, as well as convenience for medical staff. It eliminates the need for costly sterilization and reprocessing, and reduces the risk of cross-contamination.

Q: What is the size of Disposable IV Cannula?

A: Disposable IV Cannula size ranges from 16G to 24G, depending on the application.

Q: What materials are used to make Disposable IV Cannula?

A: Disposable IV Cannula is made of medical grade stainless steel, and is designed to be compatible with the most commonly used medical tubing.

Q: How long does a Disposable IV Cannula last?

A: Disposable IV Cannula is designed for single-use only and should be discarded after use.